Mad Engineering at its Finest

by Cody Daniel

3-Axis CNC Mill » Work Table Close Up

A good shot of the mill bit (3/8" 2 flute) and work table, with a "sacrificial" piece of Al bar stock on board

A good shot of the mill bit (3/8″ 2 flute) and work table, with a “sacrificial” piece of Al bar stock on board

A good shot of the mill bit (3/8″ 2 flute) and work table, with a “sacrificial” piece of Al bar stock on board

The 18V Dewalt drill motor and belt drive assembly
A sample light cut (long traverse) and a full width, high speed, high depth-of-cut (jagged death-looking traverse)

Wednesday, January 26th, 2011 at 21:53